Labgear DigiLink I/O – RF Convertor with DC Input and PSU
The MRX600K provides an RF output for the latest Sky HD set top boxes with no RF output of their own.
- Converts the Sky I/O port to an RF output
- Can be connected to a TV distribution system to allow viewing and IR remote control from multiple locations
- Aerial loop through for Freeview signal distribution
- Fully compatible with new and existing TV distribution systems
- ALlows the use of existing RF Link devices used to distribute Sky signals and control remotely Sky receivers
- RF modulator output channels 21CH – 69CH
- RF forward frequency range 47-862MHz
- Return path frequency range 5 to 12 MHz (RF OUT to I/O port)
- RF IN connector x 1 IEC female
- RF OUT connector x 2 IEC male
- I/O connector 10 pin mini DIN plug on 250mm flylead
- DC output (RF OUT) Regulated 9VDC 100mA (short circuit protected)
- Power supply Input 100-240V~50/60Hz 0.35A
- Power supply Output 12V??1000mA max
- Width: 55mm
- Depth: 60mm
- Height: 25mm
- Gross Weight: 35
| Part Number | MRX600K |
|---|
