2 Input 6 + FULL Output Distribution Amplifier
Ideal for distributing TV/FM/DAB signals for 6 TVs & high level output for further distribution
This fully screened distribution amplifier carries analogue/digital TV and radio, FM/DAB, Freeview, DVB-T and DVB-T2 HD TV signals and has:
- Separate inputs for VHF (Band III TV, FM and DAB digital radio) and UHF (Freeview, DVB-T and DVB-T2 HD digital TV)
- Automatic line powering on the UHF input to power a masthead pre-amplifier for fringe reception areas or if you have a long cable run from aerial to amplifier
- FULL (17dB) output which can either be used for very long cable runs or via a signal splitter to feed up to 8 further points.
- A built-in Class 3 4G filter providing 45dB interference protection
- More efficient Switch-Mode Power Supply which runs cooler
- Improved gain flatness delivering a better balance across the performance range
- Lower noise figure for optimised signal quality
- Greater signal handling capacity to cope with more channels
- Better impedance matching and therefore improved signal transfer from amp to cable
- Compliant with the Radio Equipment Directive 2014/53/EU* and meets harmonised standard EN 303 354 for product Type D, Class 3
| Specifications | LDA2061LR |
| No of Inputs/Outputs | 2/6 + Full |
| Frequency Range | VHF 87-230MHz, UHF 470-782MHz |
| Gain per port | 10dB/17dB Full |
| Gain flatness | +/-1dB |
| Noise Figure | Typical <3.0dB |
| 4G protection Class 3 | Typical -45dB |
| Isolation between outlets | 20dB |
| Max. output level (IMA3 -60dB) | 85dBμV |
| Return loss Input/Output | 12dB/9dB |
| Auto Line Power on UHF | 12V?50mA |
| RED, EMC and LVD | Compliant |
| Built-in Power Supply | 220V~50hz <3W |
| Dimensions | 265 x 95 x 35mm |
Click here to view the instruction manual.
| Part Number | LDA2061LR |
|---|
